Brother MFC-9440CN - Manual (Page 14)

Introduction
6
1
Protocols
1
TCP/IP protocols and functions
1
Protocols are the standardized sets of rules for transmitting data on a network. Protocols allow users to gain
access to network connected resources.
The print server used on this Brother product supports the TCP/IP (Transmission Control Protocol/Internet
Protocol) protocol.
TCP/IP is the most popular set of protocols used for communication such as Internet and E-mail. This protocol
can be used in almost all operating systems such as Windows
®
, Macintosh
®
and Linux.
The following TCP/IP protocols are available on this Brother product.
Note
• You can configure the protocol settings by using the HTTP (web browser). See Using Web Based
Management (web browser) to change the print/scan settings on page 14.
• For the protocols of security features, see Security protocols on page 47.
DHCP/BOOTP/RARP
1
By using the DHCP/BOOTP/RARP protocols, the IP address can be automatically configured.
Note
To use the DHCP/BOOTP/RARP protocols, please contact your network administrator.
APIPA
1
If you do not assign an IP address manually (using the control panel of the machine or the BRAdmin software)
or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA)
protocol will automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255.
DNS client
1
The Brother print server supports the Domain Name System (DNS) client function. This function allows the
print server to communicate with other devices by using its DNS name.
LPR/LPD
1
Commonly used printing protocols on a TCP/IP network.
SMTP client
1
Simple Mail Transfer Protocol (SMTP) client is used to send E-mails via Internet or Intranet.
Port9100
1
Another commonly used printing protocol on a TCP/IP network.