Brother FAX 1920CN - Manual (Page 160)

WALK-UP PHOTOCAPTURE CENTER ™ (MFC-3320CN ONLY) 12 - 13
Understanding the Error Messages
Once you are familiar with the types of errors that can occur while
you’re using the PhotoCapture Center
™ , you can easily identify and
troubleshoot any difficulties.
When an error message appears on the LCD, the machine will beep
to get your attention.
Media Error — This message will appear if you insert a media card
that is either bad or not formatted, or when there is a problem with
the media drive. To clear this error, take out the media card.
No File — This message will appear if you try to access the media
card in the drive (slot) does not contain a .JPG file.
Out Of Memory — This message will appear if you are working with
images that are too large for the machine’s memory.
Unsupported Card — This message will appear if you insert a
media card that is not supported.
Using PhotoCapture Center
™
from
your PC
You can access the media card that is in the media drive (slot) of the
machine from your PC.
See Using PhotoCapture Center
™
from your PC. (See Using the
PhotoCapture Center ™ from your PC on page 7-1 in Software User’s
Guide on the CD-ROM or Using the PhotoCapture Center
™
from a
Macintosh ® (MFC-3320CN and MFC-3820CN only) on page 9-23 in
Software User’s Guide on the CD-ROM.)
Using PhotoCapture Center
™
for
scanning originals
You can scan the originals into a media card. (See Scan to Card
(MFC-3320CN and MFC-3820CN only) on page 2-22 in Software
User’s Guide on the CD-ROM.)