Brother FAX-60 User Manual
Owner's manual, Brothec fax
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Table of contents
Document Outline
- FAX
- BEFORE REMOVING THE UNIT FROM THE PACKING CARTON
- CONTENTS OF THE PACKING CARTON
- PROCEDURES FOR REMOVING THE UNIT FROM THE PACKING CARTON
- I. SINGLE-LINE TELEPHONE CONNECTIONS
- II. MULTI-LINE TELEPHONE CONNECTIONS
- III. ELECTRICAL CONNECTION
- "CAUTION: BOTH ICM AND OGM MESSAGES WILL BE ERASED IN THE EVENT OF A
- POWER INTERRUPTION. CARE SHOULD BE EXERCISED WHEN UNPLUGGING THE UNIT OR TURNING OFF THE UNIT'S MAIN POWER SWITCH."
- IV. INSERTING THE RECORDING PAPER ROLL INTO THE UNIT
- "CAUTION: BOTH ICM AND OGM MESSAGES WILL BE ERASED IN THE EVENT OF A
- POWER INTERRUPTION. CARE SHOULD BE EXERCISED WHEN UNPLUGGING THE UNIT OR TURNING OFF THE UNIT'S MAIN POWER SWITCH."
- m
- O
- ?§
- CONTROL PANEL
- THE CONTROLS ON THE LOWER FRONT OF THE UNIT ARE:
- I. TRANSMISSION OF DOCUMENTS
- II. RECEPTION OF DOCUMENTS
- A. Manual Reception
- B. Automatic Reception
- The general programming procedure
- "CAUTION: BOTH ICM AND OGM MESSAGES WILL BE ERASED IN THE EVENT
- OF A POWER INTERRUPTION. CARE SHOULD BE EXERCISED WHEN UNPLUGGING THE UNIT OR TURNING OFF THE UNIT'S MAIN POWER SWITCH."
- II. USER-SELECTABLE SWITCH
- To set a user-selectable function:
- "CAUTION: BOTH ICM AND OGM MESSAGES WILL BE ERASED IN THE EVENT
- OF A POWER INTERRUPTION. CARE SHOULD BE EXERCISED WHEN UNPLUGGING THE UNIT OR TURNING OFF THE UNIT'S MAIN POWER SWITCH."
- I. HOW TO USE THE FAX-60 AS A TELEPHONE
- A. Telephone Controls
- B. Using the handset
- C. Standard dialing
- D. Using the redial function
- E. Speed Dialing
- F. Using the PAUSE button
- THE MEMO FEATURE
- A. Recording the memo
- B. Accessing the memo
- ill. USING THE TELEPHONE ANSWERING DEVICE (TAD)
- A. Recording the Outgoing Message (OGM)
- B. Playback of the OGM
- C. Playing back the callers' messages and voice memos
- D. Erasing the messages/memos
- E. Remote operation of the TAD
- F. Setting the TAD security code
- "CAUTION: BOTH ICM AND OGM MESSAGES WILL BE ERASED IN THE EVENT
- OF A POWER INTERRUPTION. CARE SHOULD BE EXERCISED WHEN UNPLUGGING THE UNIT OR TURNING OFF THE UNIT'S MAIN POWER SWITCH."
- G. How to change the number of ICM
- H. The TAD and the auto-recelve functions
- The toll-saver feature
- IV. ENHANCED RECORDING MODE
- A. OGM recording
- B. MEMO recording
- C. How to change recording modes
- "CAUTION: BOTH ICM AND OGM MESSAGES WILL BE ERASED IN THE EVENT
- OF A POWER INTERRUPTION. CARE SHOULD BE EXERCISED WHEN UNPLUGGING THE UNIT OR TURNING OFF THE UNIT’S MAIN POWER SWITCH."
- I. CLEANING THE PRINTING AREA
- CLEANING THE SCANNING AREA
- III. CLEANING THE BODY OF THE UNIT
- I.
- TRANSMITTING
- SPEED-DIAL DIRECTORY