Brother MFC-5890CN - Manual (Page 131)

Control panel setup
121
6
s
Press a or b to choose Passive Mode.
t Press to choose On or Off.
u Press a or b to choose Port Number.
v
Enter the port number.
Press OK.
w Choose the file name you want to use for the scanned document. You can choose from seven preset
and two user defined File Names. The file name that will be used for your document will be the file name
you selected plus the last 6 digits of the flatbed/ADF scanner counter plus the file extension (For
example, BRNxxxxxxxxxxxx098765.pdf). You can also manually enter a File Name up to 15 characters.
Press a or b to choose File Name.
x Press a or b to choose the file name you want to use.
Press OK.