Caution, Power supply, Foot controller – Brother DZ3000 User Manual

Page 16

Advertising
background image

14

KNOWING YOUR SEWING MACHINE ———————————————————————————————————————————————————————————————————————————————————

Power supply

a

Insert the plug into a wall outlet.

a Main power switch
b Jack/socket connector

b

Set the main power switch to “I”.

X

The sewing light comes on when the

machine is turned on.

Memo

● When the machine is turned on, the needle

and the feed dogs will make sound when
they move; this is not a malfunction.

c

To turn off the machine, set the main power
switch to “

{

”.

X

The sewing light goes off when the
machine is turned off.

Note

● If a power outage occurs while the sewing

machine is being operated, turn off the
sewing machine and unplug the power
supply cord. When restarting the sewing
machine, follow the necessary procedure to
correctly operate the machine.

(For U.S.A. only)

● This appliance has a polarized plug (one

blade wider than the other). To reduce the
risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet,
reverse the plug.
If it still does not fit, contact a qualified
electrician to install the proper outlet. Do
not modify the plug in any way.

Foot controller

Insert the foot controller plug into its jack/socket on
the rear side of the sewing machine.

a Foot controller jack/socket

When you press the foot controller down lightly, the
machine will run at a low speed. When you press
harder, the machine’s speed will increase. When you
take your foot off the foot controller, the machine
will stop.

You should make sure that nothing is placed on the
foot controller when the machine is not in use.

Note

● When the foot controller is plugged in, the

start/stop button cannot be used to start
sewing (only for models equipped with the
start/stop button).

2

1

When connecting the foot controller, be sure

to turn off the sewing machine in order to
prevent the machine from accidentally being
started.

Do not allow pieces of cloth and dust to build

up on the foot controller. Doing so could
cause a fire or an electric shock.

CAUTION

Slower

Faster

CAUTION

Advertising
This manual is related to the following products: