Brother DZ3000 - Manual (Page 41)

39
2
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Selecting a stitch
Using the stitch selection keys, select the desired
stitch.
When the sewing machine is turned on, the straight
stitch (
left needle position) is selected.
a
Turn on the sewing machine.
b
(For models equipped with the Utility stitch key)
Confirm that the utility stitch indicator is lit. If
it is not lit, press the utility stitch key once or
more until the utility stitch indicator is lit.
a Utility stitch key
b Utility stitch indicator
Memo
● (For models equipped with mirror image
stitches)
When you want to select the mirror image
stitch, press the utility stitch key once or
more until the mirror image stitch indicator
is lit.
a Utility stitch key
b Mirror image stitch indicator
c
Press (stitch selection keys). The
number of the selected stitch is displayed.
Press the “+” or “–” side of to increase or
reduce the number by one. Pressing on the
right changes the digit on the right and pressing
on the left changes the digit on the left.
X The stitch is selected.
Memo
● The pattern numbers of the stitches are
displayed on the machine.
d
Attach the presser foot indicated in the LCD.
a Presser foot type
• For details, refer to “Replacing the presser
foot” (page 36).
Memo
● The presser foot to be used is indicated by
the letter (J, A, etc.) that appears above or
beside the stitch number.
e
If necessary, adjust the stitch length and
width.
• For details on sewing with each of the stitches,
refer to the following example.