Brother MFC-790CW - Manual (Page 49)

Security features
33
4
Changing your memory security
password
4
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Miscellaneous
.
e
Press Miscellaneous.
f
Press a or b to display Mem Security.
g
Press Mem Security.
h
Press Set Password.
i
Enter the registered 4-digit number for
the current password using the buttons
on the LCD.
Press OK.
j
Enter a 4-digit number for a new
password.
Press OK.
k
When the LCD shows Verify:,
re-enter the new password.
Press OK.
l
Press Stop/Exit.
Turning the memory security
on/off
4
Turning on the memory security lock
4
a
Press MENU.
b
Press a or b to choose Fax.
c
Press Fax.
d
Press a or b to display
Miscellaneous
.
e
Press Miscellaneous.
f
Press a or b to display Mem Security.
g
Press Mem Security.
h
Press Set Security.
i
Enter the registered 4-digit password.
Press OK.
The machine goes offline and the LCD
shows Memory Security.
Note
If there is a power failure the data will stay
in memory for approximately 24 hours.
Turning off the memory security
4
a
Press Unlock.
b
Enter the registered 4-digit password
using the buttons on the LCD.
Press OK.
Memory Security is automatically turned
off.
Note
If you enter the wrong password, the LCD
shows Wrong Password and stays
offline. The machine will stay in Secure
mode until the registered password is
entered.