Brother MFC-790CW - Manual (Page 66)

Chapter 6
50
Memory Receive
(Black&White only)
6
You can only use one Memory Receive
operation at a time.
„ Fax Forwarding
„ Paging
„ Fax Storage
„ PC Fax Receive
„ Off
You can change your selection at any time. If
received faxes are still in the machine’s
memory when you change the memory
receive operation, a LCD question will appear
on the LCD. (See Changing Memory Receive
Operations on page 54.)
Fax Forwarding
6
When you choose Fax Forwarding, your
machine stores the received fax in the
memory. The machine will then dial the fax
number you have programmed and forward
the fax message.
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive
.
e
Press Setup Receive.
f
Press a or b to display
Memory Receive
.
g
Press Memory Receive.
h
Press Fax Forward.
i
Enter the forwarding number (up to 20
digits) by using the buttons on the LCD.
Press OK.
j
Press Backup Print:On or
Backup Print:Off
.
Note
• If you choose Backup Print:On, the
machine will also print the fax at your
machine so you will have a copy. This is
the safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine. This
Backup Print:On
feature will not work
if Fax Preview is on.
• The machine can store fax approximately
24 hours if there is a power failure.
• When you receive a color fax, your
machine prints the color fax at your
machine but does not send the fax to the
fax forwarding number you programmed.
k
Press Stop/Exit.