Brother MFC-790CW - Manual (Page 67)

Receiving a Fax
51
6
Paging
6
When you choose Paging, your machine
dials the pager number you have
programmed, and then dials your PIN
(Personal Identification Number). This
activates your pager so you will know that you
have a fax message in the memory.
If you have set Paging, a backup copy of the
received fax will automatically be printed at
the machine.
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive
.
e
Press Setup Receive.
f
Press a or b to display
Memory Receive
.
g
Press Memory Receive.
h
Press Paging.
i
Enter your pager phone number
followed by # # (up to 20 digits) using the
buttons on the LCD.
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press:
1
8 0 0 5 5 5 1 2 3 4 # #.
j
Do one of the following:
„ If your pager needs a PIN, enter the
PIN, press #, press Pause, and then
enter your fax number followed by
#
# using the buttons on the LCD.
Press OK.
For example, press:
1 2 3 4 5 # Pause 1 8 0 0 5 5 5 6 7 8
9 # #
„ If you do not need a PIN, press:
Pause
, and then enter your fax
number followed by # # using the
buttons on the LCD. Press OK.
For example, press:
Pause 1 8 0 0 5 5 5 6 7 8 9 # #
k
Press Stop/Exit.
Note
• You cannot change a paging number or
PIN remotely.
• If Paging is turned on your machine
cannot receive a color fax unless the
sending machine converts it to black &
white.
• If you want to be paged for voice
messages, make sure you pressed MC
on/off key to turn the Message Center on.