Brother MFC-790CW - Manual (Page 75)

Receiving a Fax
59
6
Using your Remote Access
Code
6
a
Dial your fax number from a touch tone
telephone or another fax machine.
b
When your machine answers, enter
your remote access code (3 digits
followed by l) at once.
c
The machine signals if it has received
messages:
„
1 long beep — Fax messages
„ 2 long beeps — Voice messages
„
3 long beeps — Fax & Voice
messages
„
No beeps — No messages
d
When the machine gives two short
beeps, enter a command.
The machine will hang up if you wait
longer than 30 seconds to enter a
command.
The machine will beep three times if you
enter an invalid command.
e
Press 9 0 to reset the machine when you
have finished.
f
Hang up.
Note
If your machine is set to Manual mode
and you want to use the remote retrieval
features, wait about 100 seconds after it
starts ringing, and then enter the remote
access code within 30 seconds.