Brother MFC-8870DW - Manual (Page 41)

Installing the Driver & Software
39
Macintosh
®
M
aci
n
to
s
h
®
Wi
re
d
Ne
tw
o
rk
For Wired Network Interface Users
For Mac OS
®
X 10.2.4 or greater
Important
Make sure that you have finished the
instructions from step 1 Setting Up the
Machine on page 4 to 11.
1
Turn off and unplug the machine from the AC
outlet and disconnect it from your Macintosh
®
,
if you already connected an interface cable.
2
Turn on your Macintosh ® .
3
Put the supplied CD-ROM into your CD-ROM
drive.
4
Double-click the Start Here OSX icon to install
the drivers and MFL-Pro Suite. If the language
screen appears, choose your language.
5
Click MFL-Pro Suite to install.
6
Choose Wired Network Connection, and
then click Next. Follow the on-screen
instructions, and restart your Macintosh
® .
7
After the DeviceSelector window appears,
connect the network interface cable to your
Macintosh
®
and then to the machine.
Note
The DeviceSelector window will not appear if you
have also connected a USB interface cable to the
machine before restarting your Macintosh
®
or if
you are overwriting a previously installed version
of the Brother Software. If you encounter this
problem continue but skip steps 13 to 16. After the
software installation is completed you should
choose your Brother machine from the Model
pull-down list in the main screen of
ControlCenter2. For details, see Chapter 10 in the
Software User’s Guide on the CD-ROM.