Brother MFC-J4610DW - Manual (Page 56)

Chapter 5
42
To set the Receive Mode, follow the instructions below:
a
Press (Settings).
b
Press s or t on the Touchpanel to display Initial Setup.
c
Press Initial Setup.
d
Press s or t to display Receive Mode.
e
Press Receive Mode.
NOTE
If you cannot change the Receive Mode, make sure the Distinctive Ring feature is set to Off.
(See Turning off Distinctive Ring on page 49.)
f
Press s or t to display Fax Only, Fax/Tel, External TAD or Manual, and then press
the option you want to set.
g
Press .
The Touchscreen will display the current Receive Mode.