Brother MFC-8950DWT - Manual (Page 14)

11
Introduction
1
g
A message is displayed prompting you to enter a name for the account as you want it to be displayed on
the LCD.
Press OK.
h
Enter the name by using the buttons on the LCD.
Press OK.
i Do one of the following:
 If you want to set a PIN code for the account, press Yes. Then enter a four-digit number and press
OK
. (The PIN code prevents unauthorized access to the account.)
 If you do not want to set a PIN code, press No.
j You will be asked if you want to register the account information you entered.
Do one of the following:
 Press Yes to register.
 Press No to enter the information again. Go back to step f.
k Account registration is complete.
Press OK.
l
Press Stop/Exit.
Note
Up to 10 accounts can be registered on the machine.
Delete an account
1
a Press Web on your machine’s LCD.
If information regarding Internet connection is displayed, press OK. You will be asked if you want to
display this information again in the future. Press Yes or No.
Note
If there are announcements about new features, and so on, the latest information will be displayed. Read
the information and press OK.
b
Choose EVERNOTE(R).
c Press Register/Delete Account.
d Press Delete Account.
e Press the account that you want to delete. The selected account will be indicated by check mark.
f Press OK.
g You will be asked to confirm your selections.
Press Yes to delete.