Brother MFC-885CW - Manual (Page 13)

Setting Up the Machine
11
4
The LCD asks you if the print quality is OK for
black and color. Press 1 (Yes) or 2 (No) on the
dial pad.
After pressing 1 (Yes) or 2 (No) for both black
and color, the LCD shows:
5
Press 1 (Yes), the machine will then start
cleaning the colors.
6
After cleaning is finished, press Color Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step
2.
6 Choosing your language
(Canada only)
1
Press Menu.
2
Press a or b to choose Initial Setup.
Press OK.
3
Press a or b to choose Local Language.
Press OK.
4
Press a or b to choose your language
(English or French).
Press OK.
5
Press Stop/Exit.
7 Setting the LCD contrast
You can adjust the LCD contrast for a sharper and
more vivid display. If you are having difficulty reading
the LCD, try changing the contrast setting.
1
Press Menu.
2
Press a or b to choose General Setup.
Press OK.
3
Press a or b to choose LCD Settings.
Press OK.
4
Press a or b to choose LCD Contrast.
5
Press or to choose Light, Med or
Dark.
Press OK.
6
Press Stop/Exit.
Note
You can also adjust the angle of the LCD display
by lifting it.
8 Setting the date and time
The machine displays the time, and if you set up the
station ID the date and time will be added to each fax
you send.
1
Press Menu.
2
Press a or b to choose Initial Setup.
Press OK.
3
Press a or b to choose Date&Time.
Press OK.
4
Enter the last two digits of the year on the dial
pad, and then press OK.
(e.g. Enter 0 7 for 2007.)
Black OK?
Yes Press
Press
No
Color OK?
Yes Press
Press
No
Start Cleaning?
Yes Press
Press
No
Date&Time
Year:20
07
MENU Input & Press OK