Advantech DVMB-554E - Manual (Page 55)

55
“2E8/IRQ3”, and “Disabled” for the on-board serial connector.
3.6.17 UART Mode Select
This item allows you to select UART mode. The choices: “IrDA”,
“ASKIR”, and “Normal”.
3.6.18 RxD, TxD Active
This item allows you to determine the active level of the RxD and TxD
serial lines. The Choices: “Hi, Hi”, “Lo, Lo”, “Lo, Hi”, and “Hi, Lo”.
3.6.19 IR Transmission Delay
This item allows you to enable/disable IR transmission delay.
The choices are “Enabled” and “Disabled”.
3.6.20 UR2 Duplex Mode
This item allows you to select the IR half/full duplex function.
The choices are “Half” and “Full”.
3.6.21 Use IR Pins
The choices are “RxD2, TxD2” and “IR-Rx2Tx2”.
Figure 3.9: Watch Dog Timer
3.6.22 Watch Dog Timer Select
Allow User select watch Dog time or disable..