Brother DCP-J140W - Manual (Page 50)

Scanning
43
2
h
Adjust the following settings, if needed, in the Scanner Setup dialog box:
1 Picture type
2 Adjust the quality of the scanned picture
3 Preview
4 Scan
i
Choose the picture type.
j If you want to change some advanced settings, click Adjust the quality of the scanned picture. You
can choose Brightness, Contrast, Resolution and Picture type from Advanced Properties. Click OK
after choosing the settings.
Note
By default, the scanner resolution can be set to a maximum of 1200 dpi. If you want to scan at higher
resolutions, use the Scanner Utility. (See Scanner Utility uu page 45.)
3 4
1
2