Brother TD-2120N - Manual (Page 107)

Using the WLAN Interface (Optional:PA-WI-001) (TD-2120N/2130N only)
101
11
n
Select the printer from the list, and then
click [Next].
Installation of the printer driver and
software begins.
NOTE
• If wireless setup failed, the [Wireless
Device Setup Wizard] screen appears.
Follow the on-screen instructions to
complete the wireless configuration.
• If WEP is being used as the encryption
method and your printer is not found,
make sure that you typed in the WEP key
correctly.
o
The P-touch Update Software can be
used to check for updates. When [OK to
use P-touch Update Software to
update the software to the newest
version? (An Internet connection is
required to update.)] appears, click
[Yes] or [No].
 To check for new versions of the
software and to update them, click
[Yes], and then go to step p.
 To not check for new software
versions or update them, click [No],
and then go to step q.
NOTE
If you click [No] here, you can run the
P-touch Update Software at a more
convenient time to check for new software
versions and update them. Double-click
the P-touch Update Software icon on the
desktop. (Your computer must be
connected to the Internet.)
p
The P-touch Update Software starts up.
 If an application appears under [File
list], there is a new version of the
application. If the check box is
selected and [Install] is clicked, that
application can be installed. Wait
until a message appears indicating
that the installation has finished.
 If no application appears under [File
list], the application currently
installed on the computer is the
newest version. There is no need to
update. Click [Close].