Brother TD-2120N - Manual (Page 95)

Using the Touch Panel Display (Optional:PA-TDU-001) (TD-2120N/2130N only)
89
10
Label Layouts on the
Printer (Checking,
Deleting and Log)
10
With the following procedures, label layouts
on the printer can be checked or deleted, or
their print log can be viewed.
Checking the Contents of a Label
Layout
10
To display template details in the screen and
check the contents, press [ ] (search key) on
the touch panel display. For details, see
Printing Using the Basic Control Panel
on page 85.
Deleting a Label Layout
10
[Device settings] of the “Printer Setting
Tool” can be used to delete a label layout
from the printer. On the menu bar, click
[Tools] - [Delete Template and Database] to
delete a template or database registered on
the printer. For details, see Menu Bar
on page 40.
To check the label layouts on the printer and
select the data to be deleted, connect the
printer to a computer and use P-touch
Transfer Manager. For details, see the
Software User’s Guide included on the
CD-ROM.
Checking the Print Log for Label
Layouts
10
[Device settings] of the “Printer Setting
Tool” can be used to check the print log. If
[Save Printer Print Log] on the [Advanced]
tab is set to [Enable], a print log will be saved
on the printer. To export the print log and
save it as a .csv file, click [Tools] - [Save
Print Log in File]. For details, see Device
Settings on page 34.
Replacing the
Time/Date Battery
10
A time/date battery is provided in order to
maintain the settings for the internal clock.
The battery will be consumed even if the
printer is not used for a long period of time.
 Only use recommended batteries in
the printer. Other batteries may
cause damage to the printer.
 Dispose of the battery at an
appropriate collection point, not in
the general waste stream. In
addition, be sure to observe all
applicable federal, state, and local
regulations.
 When storing or discarding the
battery, wrap it (for example with
cellophane tape), to prevent it from
short-circuiting.
(Battery insulation example)
1 Cellophane tape
2 Time/date battery
 We recommend replacing the
battery every two years.
 If the clock is reset while power is
supplied to the printer, replace this
battery. When replacing the lithium
battery, purchase a CR2032 battery
(recommended manufacturers:
Hitachi Maxell, Ltd., FDK
Corporation, Panasonic
Corporation, Sony Corporation,
Toshiba Corporation and VARTA
Microbattery Inc.).
1
2