Document Outline

• NETWORK USER’S GUIDE
  • Definitions of notes
  • IMPORTANT NOTE
  • Table of Contents
  • 1 Introduction
    • Network features
      • Other Network features
        • LDAP
        • Internet fax (MFC-9970CDW: standard, MFC-9460CDN, MFC-9465CDN and MFC-9560CDW: available as a download)
        • Security
        • Fax to Server (MFC-9970CDW: standard, MFC-9460CDN, MFC-9465CDN and MFC-9560CDW: available as a download)
        • Secure Function Lock 2.0
        • Store Print Log to Network
  • 2 Changing your machine’s network settings
    • How to change your machine’s network settings (IP address, Subnet mask and Gateway)
      • Using the control panel
      • Using the BRAdmin Light utility
        • Installing BRAdmin Light
        • Setting the IP address, Subnet Mask and Gateway using BRAdmin Light
    • Other Management Utilities
      • Web Based Management (web browser)
      • BRAdmin Professional 3 utility (Windows®)
      • Web BRAdmin (Windows®)
      • BRPrint Auditor (Windows®)
  • 3 Configuring your machine for a wireless network (For MFC-9560CDW and MFC-9970CDW)
    • Overview
    • Step by step chart for wireless network configuration
      • For Infrastructure mode
      • For Ad-hoc mode
    • Confirm your network environment
      • Connected to a computer with a WLAN access point/router in the network (Infrastructure mode)
      • Connected to a wireless capable computer without a WLAN access point/router in the network (Ad-hoc mode)
    • Confirm your wireless network setup method
      • Configuration using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network (Automatic Wireless mode) (Infrastructure mode only) (Recommended)
      • Configuration using the machine’s control panel Setup Wizard to configure your machine for a wireless network
      • Configuration using the Brother installer application on the CD-ROM to configure your machine for a wireless network
        • Configuration using the Automatic Wireless mode
        • Configuration temporarily using a USB or network cable
      • Configuration using the PIN Method of Wi-Fi Protected Setup to configure your machine for a wireless network (Infrastructure mode only)
    • Configuring your machine for a wireless network (For Infrastructure mode and Ad-hoc mode)
      • Using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network (Automatic Wireless mode)
      • Using the Setup Wizard from the control panel
      • Configuring your machine when the SSID is not broadcast
      • Configuring your machine for an enterprise wireless network
      • Using the Brother installer application on the CD-ROM to configure your machine for a wireless network
      • Using the PIN Method of Wi-Fi Protected Setup
  • 4 Wireless configuration using the Brother installer application (For MFC-9560CDW and MFC-9970CDW)
    • Before configuring the wireless settings
    • Configure the wireless settings
  • 5 Control panel setup
    • Network menu
      • TCP/IP
        • Boot Method
        • IP Address
        • Subnet Mask
        • Gateway
        • Node Name
        • WINS Config
        • WINS Server
        • DNS Server
        • APIPA
        • IPv6
      • Ethernet (wired network only)
      • Status (For DCP-9055CDN, DCP-9270CDN, MFC-9460CDN and MFC-9465CDN)/Wired Status (For MFC-9560CDW and MFC-9970CDW)
      • Setup Wizard (wireless network only)
      • WPS or AOSS™ (wireless network only)
      • WPS w/PIN Code (wireless network only)
      • WLAN Status (wireless network only)
        • Status
        • Signal
        • SSID
        • Comm.Mode
      • MAC Address
      • Set to Default (For MFC-9560CDW and MFC-9970CDW)
      • Wired Enable (For MFC-9560CDW and MFC-9970CDW)
      • WLAN Enable (For MFC-9560CDW and MFC-9970CDW)
      • E-mail / IFAX (MFC-9970CDW and DCP-9270CDN (E-mail only))
        • Mail Address
        • Setup Server
          • SMTP
          • POP3
        • Setup Mail RX (For MFC-9970CDW)
          • Auto Polling
          • Poll Frequency
          • Header
          • Del Error Mail
          • Notification
        • Setup Mail TX
          • Sender Subject
          • Size Limit
          • Notification
        • Setup Relay (For MFC-9970CDW)
          • Relay Broadcast
          • Relay Domain
          • Relay Report
      • Fax to Server (For MFC-9970CDW)
        • Setting Fax to Server to On
        • How to operate Fax to Server
      • How to set a new default for Scan to FTP
      • How to set a new default for Scan to Network
    • Reset the network settings to the factory default
    • Printing the Network Configuration List
    • Printing the WLAN report (For MFC-9560CDW and MFC-9970CDW)
    • Function table and default factory settings
      • DCP-9055CDN, MFC-9460CDN and MFC-9465CDN
      • MFC-9560CDW
      • DCP-9270CDN
      • MFC-9970CDW
  • 6 Web Based Management
    • Overview
    • How to configure the machine settings using Web Based Management (web browser)
    • Password information
    • Secure Function Lock 2.0
      • How to configure the Secure Function Lock 2.0 settings using Web Based Management (web browser)
        • Basic configuration
        • Scanning when using Secure Function Lock 2.0
        • Restricting PC print by PC user login name
        • Setting up public mode
        • Other features
    • Synchronize with SNTP server
    • Store Print Log to Network
      • How to configure the Store Print Log to Network settings using Web Based Management (web browser)
      • Error Detection Setting
      • Understanding Error Messages
      • Using Store Print Log to Network with Secure Function Lock 2.0
    • Changing the Scan to FTP configuration using a web browser
    • Changing the Scan to Network configuration using a web browser
    • Changing the LDAP configuration using a web browser (For DCP-9270CDN and MFC-9970CDW)
  • 7 LDAP operation (For DCP-9270CDN and MFC-9970CDW)
    • Overview
      • Changing the LDAP configuration using a Browser
      • LDAP operation using the control panel
  • 8 Internet fax (For MFC-9970CDW)
    • Internet fax Overview
      • Important information on Internet fax
    • How to Internet fax
      • Sending an Internet fax
        • Before sending an Internet fax
        • How to send an Internet fax
      • Receiving E-mail or Internet fax
        • Before receiving an Internet fax
        • How to receive an Internet fax
        • Receiving an Internet fax to your computer
    • Additional Internet Fax options
      • Forwarding received E-mail and fax messages
      • Relay broadcasting
        • Before relaying broadcast
        • Relay broadcast from a machine
        • Sending to multiple phone numbers:
        • Relay broadcast from a computer
      • TX Verification Mail
        • Setup Mail TX
        • Setup Mail RX
      • Error mail
  • 9 Security features
    • Overview
    • Managing your network machine securely using SSL/TLS
      • Secure Management using Web Based Management (web browser)
    • Printing documents securely using SSL/TLS
    • Sending or Receiving an E-mail securely
      • Configuration using Web Based Management (web browser)
      • Sending an E-mail with user authentication
      • Sending or Receiving an E-mail securely using SSL/TLS
    • Using IEEE 802.1x authentication
      • IEEE 802.1x authentication configuration using Web Based Management (web browser)
    • Secure Management using BRAdmin Professional 3 (Windows®)
      • To use the BRAdmin Professional 3 utility securely, you need to follow the points below
    • Using Certificates for device security
      • Configure certificate using Web Based Management
      • Creating and installing a certificate
        • Step by step chart for creating and installing a certificate
        • How to create and install a self-signed certificate
        • How to install the self-signed certificate on your computer
        • How to create a CSR
        • How to install the certificate to your machine
      • Import and export the certificate and private key
        • How to import the self-signed certificate, the certificate issued by a CA, and the private key
        • How to export the self-signed certificate, the certificate issued by a CA, and the private key
    • Managing multiple certificates
      • Import and export a CA certificate
        • How to import a CA certificate
        • How to export a CA certificate
  • 10 Troubleshooting
    • Overview
      • Identifying your problem
        • Go to the page for your solution from the lists below
  • Appendix A
    • Supported protocols and security features
  • Index
• Network Glossary
  • Table of Contents
  • 1 Types of network connections and protocols
    • Types of network connections
      • Wired network connection example
        • Peer-to-Peer printing using TCP/IP
        • Network Shared printing
    • Protocols
      • TCP/IP protocols and functions
        • DHCP/BOOTP/RARP
        • APIPA
        • ARP
        • DNS client
        • NetBIOS name resolution
        • WINS
        • LPR/LPD
        • SMTP client
        • Custom Raw Port (Default is Port 9100)
        • IPP
        • mDNS
        • TELNET
        • SNMP
        • LLMNR
        • Web Services
        • HTTP
        • FTP (For the Scan to FTP feature)
        • SNTP
        • CIFS
        • LDAP
        • IPv6
      • Other protocol
        • LLTD
  • 2 Configuring your machine for a network
    • IP addresses, subnet masks and gateways
      • IP address
        • How the IP address is assigned to your print server:
      • Subnet mask
      • Gateway (and router)
    • IEEE 802.1x Authentication
  • 3 Wireless network terms and concepts
    • Specifying your network
      • SSID (Service Set Identifier) and channels
    • Security terms
      • Authentication and encryption
      • Authentication and Encryption methods for a personal wireless network
        • Authentication methods
        • Encryption methods
        • Network key
      • Authentication and Encryption methods for an enterprise wireless network
        • Authentication methods
        • Encryption methods
        • User ID and password
  • 4 Additional network settings from Windows®
    • Types of additional network settings
    • Network printing Installation when using Web Services (Windows Vista® and Windows® 7)
    • Network printing installation for Infrastructure mode when using Vertical Pairing (Windows® 7)
  • 5 Security terms and concepts
    • Security features
      • Security terms
      • Security protocols
        • SSL (Secure Socket Layer) / TLS (Transport Layer Security)
        • HTTPS
        • IPPS
        • SNMPv3
      • Security methods for E-mail Sending and Receiving
        • POP before SMTP (PbS)
        • SMTP-AUTH (SMTP Authentication)
        • APOP (Authenticated Post Office Protocol)
        • SMTP over SSL
        • POP over SSL
  • Appendix A
    • Using services
    • Other ways to set the IP address (for advanced users and administrators)
      • Using DHCP to configure the IP address
      • Using RARP to configure the IP address
      • Using BOOTP to configure the IP address
      • Using APIPA to configure the IP address
      • Using ARP to configure the IP address
      • Using the TELNET console to configure the IP address
  • Index