Brother QL-650TD - Manual (Page 25)

25
STEP
1
STEP
2
STEP
3
Bef
o
re usi
n
g
the print
er
Int
rod
ucti
o
n
M
ai
n
tenanc
e and
T
roubleshoot
in
g
Creat
ing and
print
ing a
label
1
Insert the power cord into the power
cord slot on the rear side of the
printer.
2
Plug the power cord into an electrical outlet.
• Check that the electrical outlet is 120VAC before
plugging the power cord.
• Unplug the power cord from the electrical outlet after
you have finished using the QL-650TD.
• Do not pull the power cord when unplugging it from
the electrical outlet. The wire in the power cord may
become damaged.
• Do not connect the QL-650TD to the computer until directed to do so when
installing the printer driver. For how to install the printer driver and software,
refer to Î"Software installation Guide".
5 Connecting the power supply
Power cord Slot
Power cord