Brother QL-650TD - Manual (Page 49)

49
STEP
1
STEP
2
STEP
3
Bef
o
re usi
n
g
the print
er
In
tr
odu
ct
ion
M
aint
enanc
e and
T
roubleshoot
ing
Creat
ing and
print
ing a
label
If glue accumulates on the label outlet
and the machine becomes jammed,
disconnect the power plug from the
electrical outlet and clean the label
outlet with a cloth dipped in isopropyl
alcohol.
It is recommended to clean the label
outlet when replacing the cutter unit.
4
Insert the edge of cleaning sheet into slot until it is just in front of
the cutter.
• Insert the sheet without removing the part of sheet.
• Check that the printing surface of cleaning sheet is facing upward.
5
After inserting the cleaning sheet into the slot,
push down the roll release lever and remove
the part of cleaning sheet.
6
Close the DK Roll cover and turn ON the power.
7
Press the Feed button for more than one
second.
The roller spins by 4" (10 cm).
The adhesive face of cleaning sheet removes the stain
or dust on the roller.
• If not pressing the Feed button for more than one
second, the roller spins only 1/3" (8 mm).
• Dispose the cleaning sheet after use.
A
A
B
Feed button
Label outlet maintenance
Label outlet