Brother HL 3070CW - Manual (Page 26)

Printing Methods
16
1
Note
• To use the BR-Script printer driver for Windows
®
you must install the driver using the Custom Install
from the CD-ROM.
• When you use Envelope #10, choose Com-10 for the Paper Size.
• For other envelopes which are not listed in the printer driver, such as Envelope #9 or Envelope C6,
choose User Defined... (for Windows
®
printer driver), PostScript Custom Page Size (for BR-Script
printer driver for Windows
®
) or Custom Page Sizes (for Macintosh printer driver). For more information
on envelope sizes, see Paper size on page 172.
Macintosh printer driver
g
Send the print data to the printer.
h
After the LCD show Manual Feed, put in the next sheet of paper or envelope as shown in step e.
Repeat for each page that you want to print.
i
<For printing envelopes only>
When you have finished printing, reset the two gray levers which are pulled down at step c back to the
original position.
Note
• The LCD will show Manual Feed until a sheet of paper or an envelope is put in the manual feed slot.
• Remove each sheet or envelope at once after printing. Stacking the sheets or envelopes may cause the
paper to jam or curl.
2
1
3