Brother HL 3070CW - Manual (Page 6)

v
DO NOT place the machine near heaters, air conditioners, refrigerators, water, chemicals or devices that
contain magnets or generate magnetic fields.
DO NOT expose the machine to direct sunlight, excessive heat, open/naked flames, salty or corrosive
gasses, moisture, or dust.
DO NOT put the printer near devices that contain magnets or produce magnetic fields.
DO NOT connect your machine to an AC power outlet controlled by wall switches or automatic timers.
DO NOT connect your machine to an AC power outlet on the same circuit as large appliances or other
equipment that might disrupt the power supply.
DO NOT put the printer near heaters, air conditioners, chemicals or refrigerators.
DO NOT put objects on top of the machine.
IMPORTANT
DO NOT remove or damage the caution labels located on or around the fuser.
Note
Keep a minimum gap around the printer as shown in the illustration.
510mm(20.1 in.)
100mm
(4 in.)
100mm
(4 in.)
120mm
(4.72 in.)