Brother PT-2100 - Manual (Page 41)

1
2
3
4
5
6
7
8
9
35
z
EDIT
ING A LA
BEL
Setting Label Attributes
Using the key, you can create a label with a frame around the text and specify the
label length and tab length. (Cut Options which may be needed when printing a label
can also be set by using the
key. Refer to “Tape Cutting Options” on page 53 and
54.)
Press the key.
The current settings are displayed.
Select an attribute using the or keys, and then
set a value for that attribute using the or keys.
Press the or key to apply the settings.
Setting Label Attributes
1
• When setting the tab length, hold down the or
keys to change the value faster.
• When setting the label length, refer to “Adjusting the
Label Length” on page 55
2
New settings are NOT applied if you do not press the
or key.
3
• Press the key to return to the previous step.
• Press the key to set the selected attribute to the default value.
• Refer to the Setting Options table for a list of all available settings.