Brother HL-L8350CDWT - Manual (Page 10)

Printing Methods
3
1
1 Folio size is 8.5 in.  13 in. (215.9 mm x 330.2 mm).
2 Load only one sheet of Glossy in the MP tray.
3 Tray 2 is standard on HL-L8350CDWT.
Recommended paper specifications
1
The following paper specifications are appropriate for this machine:
 Use plain paper that is appropriate for laser machines to make copies.
 Use paper that is 20 to 24 lb (75 to 90 g/m
2
).
 Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%.
 This machine can use recycled paper that meets DIN 19309 specifications.
(Before you load paper in this machine, see Important information for choosing your paper on page 208.)
Paper Tray Capacity
Paper size Paper types No. of sheets
Paper Tray
(Tray 1) Letter, A4, Legal, B5 (JIS),
Executive, A5,
A5 (Long Edge), A6, Folio
1
Plain Paper, Thin Paper and
Recycled Paper up to 250 sheets
20 lb (80 g/m 2 )
Multi-purpose Tray
(MP Tray) Width: 3.0 to 8.5 in.
(76.2 to 215.9 mm)
Length: 5 to 14 in.
(127 to 355.6 mm)
Plain Paper, Thin Paper,
Thick Paper, Thicker Paper,
Recycled Paper, Bond Paper,
Labels, Envelopes, Env. Thin,
Env.Thick and Glossy Paper
2
up to 50 sheets
20 lb (80 g/m
2
)
3 Envelopes
1 Glossy paper
Optional Lower Tray
(Tray 2)
3
Letter, A4, Legal, B5(JIS),
Executive, A5, Folio
1
Plain Paper, Thin Paper and
Recycled Paper up to 500 sheets
20 lb (80 g/m 2 )
Basis Weight 20-24 lb (75-90 g/m
2
)
Thickness 80-110 m
Roughness Higher than 20 sec.
Stiffness 90-150 cm
3
/100
Grain Direction Long Grain
Volume Resistivity 10e
9
-10e
11
ohm
Surface Resistivity 10e
9
-10e
12
ohm-cm
Filler CaCO
3
(Neutral)
Ash Content Below 23 wt%
Brightness Higher than 80%
Opacity Higher than 85%