Brother MFC-J4510DW - Manual (Page 59)

Making copies
53
7
n
The Touchscreen shows:
Place the next page on the scanner
glass and press Scan.
Press OK.
The machine starts printing.
o
If you pressed Sort for multiple copies,
repeat step n for each additional page.
After all the pages have been scanned,
press Complete.
The machine starts printing.
DO NOT touch the printed page until it is
ejected the second time. The machine will
print the first side and eject the paper, and
then pull the paper in to print the second side.
NOTE
If you get a paper jam, press Advanced
after step i, and then press one of the
jam prevention settings: 2-sided 1 or
2-sided 2.
2-sided 1 uses a longer print time for
the ink to dry.
2-sided 2 uses a longer print time and
will also print in lighter colors.
2-sided copying
(MFC-J4710DW)
7
You can reduce the amount of paper used for
copies by copying on both sides of the paper.
We recommend you load your document in
the ADF for 2-sided copying.
NOTE
• You can copy 2-sided documents up to
Legal size using the ADF.
• You can use only Letter, A4, A5 or
Executive size plain paper.
a
Load your document.
If you want to copy a 2-sided document,
load your document in the ADF.
b
Press Copy.
c
Enter the number of copies you want.
d
Press Options.
e
If you want to sort multiple copies, swipe
up or down, or press a or b to display
Stack/Sort.
f
Press Stack/Sort.
g
Press Sort.
h
Swipe up or down, or press a or b to
display 2-sided Copy.
i
Press 2-sided Copy.
j
Swipe up or down, or press a or b to
display the 2-sided copy type you want,
and press it. (See 2-sided copying type
on page 54.)
k
Review your settings on the
Touchscreen, and then press OK.
Turn over the document
(or Flip the book), then
press [Scan]. When you
finish, press [Complete].