Brother Innov-is 6000D - Manual (Page 33)

32
f
When the pattern connection setting screen
appears, select the reference edge and
reference point corresponding to those for
the first pattern.
a Reference edge and reference point
g
Specify the distance that the pattern is to be
slid, and then press
.
a Reference edge and reference point
→ Message appears on screen and carriage will move
after pressing .
h
Continue with step
m
of “Practice
(Connecting Three Patterns)” to finish
connecting the patterns.
a
Note
• After checking that the trial embroidery results are
satisfactory, sew the actual embroidery. If you
decide to change the distance that the pattern is slid
after checking the trial embroidery, change the
settings selected in step
g .
a