Brother PT-P750W - Manual (Page 56)

Appendix
51
A
 Network
First check the following:
The rechargeable Li-ion battery is installed or the AC adapter is connected. You cannot establish a wireless network
connection when the P-touch labeler is powered by alkaline or Ni-MH.
The access point (for wireless), router or hub is turned on and its link light is flashing.
All protective packaging has been removed from the P-touch labeler.
The cassette cover is fully closed.
The tape cassette is inserted correctly in the tape cassette compartment.
I cannot complete the wireless network setup configuration.
Question Solution
Are your security settings
(SSID/Network Key) correct? Reconfirm and choose the correct security settings.
 The manufacturer’s name or model number of the WLAN access
point/router may be used as the default security settings.
 See the instructions supplied with your WLAN access point/router for
information on how to find the security settings.
 Ask the manufacturer of your WLAN access point/router or ask your
Internet provider or network administrator.
Are you using MAC Address filtering? Confirm that the MAC Address of the P-touch labeler is allowed in the filter.
You can find the MAC Address in [Communication settings] of the Printer
Setting Tool. See Using the Communication Settings on page 19 for details
about [Communication settings].
Is your WLAN access point/router in
stealth mode? (not broadcasting the
SSID)  You should enter the correct SSID name during the installation or when
using [Communication settings] in the Printer Setting Tool.
 Check the SSID name in the instructions supplied with your WLAN access
point/router and reconfigure the wireless network setup.
Is your P-touch labeler correctly
connected to the WLAN access
point/router? Check if the Wi-Fi lamp or the NFC lamp is lit.