Brother MFC-5895CW - Manual (Page 202)

186
Network
(Continued)
WLAN
(MFC-5895CW
and
MFC-6490CW)
(Continued)
TCP/IP
(Continued)
DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP
address of the
primary or
secondary
server.
APIPA On*
Off
Automatically
allocates the IP
address from the
link-local address
range.
IPv6 On
Off*
Sets the IPv6
protocol On.
Setup Wizard — — You can
configure your
print server.
WPS/AOSS
(MFC-5895CW)
SES/WPS/AOSS
(MFC-6490CW)
— — You can easily
configure your
wireless network
settings using the
one-button push
method.
WPS w/PIN Code — — You can easily
configure your
wireless network
settings using
WPS with a PIN
code.
WLAN Status Status — You can see the
current wireless
network status.
Signal — You can see the
current wireless
network signal
strength.
SSID — You can see the
current SSID.
Comm. Mode — You can see the
current
Communication
Mode.
Level1 Level2 Level3 Level4 Options Descriptions
See Network User's Guide on the CD-ROM.
The factory settings are shown in Bold with an asterisk.