Installing the driver & software, Macintosh, Improper setup – Brother MFC-820CW User Manual
Page 27
Installing the Driver & Software
25
Ma
c
int
os
h
®
US
B
Macintosh
®
10
Carefully route the USB cable through the
trench and out the back of the machine as
shown below.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
11
Lift the scanner cover to release the lock.
Gently push the scanner cover support down
and close the scanner cover.
12
Turn on the machine by plugging in the power
cord.
13
Choose USB and then click OK.
14
Click GO, then Applications.
15
Double-click the Utilities folder.
16
Double-click the Printer Setup Utility icon.
Note
For Mac
®
OS X 10.2.x users, open Print Center
icon.
17
Click Add.
18
Choose USB. (For Mac
®
OS X 10.2.4 to 10.3
users)
Note
For Mac
®
OS X 10.4 users, go to step
19.