Brother MFC-J4710DW - Manual (Page 68)

Chapter 5
54
To set the Receive Mode, follow the instructions below:
a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to display Initial Setup.
d
Press Initial Setup.
e
Swipe up or down, or press a or b to display Receive Mode.
f
Press Receive Mode.
NOTE
If you cannot change the Receive Mode, make sure the Distinctive Ring feature is set to Off.
(See Turning off Distinctive Ring on page 64.)
g
Press Fax Only, Fax/Tel, External TAD or Manual.
h
Press .