Brother MFC-8870DW - Manual (Page 102)

Control Panel Setup
88
6
Note
■
If you want to reset the settings of the wired or wireless interfaces independently, see Set to default on
page 74.
■
You can reset the print server back to its default factory settings using the BRAdmin Professional utility
for Windows
® , BRAdmin Light utility for Macintosh ® or a web browser. For more information, see Using
the BRAdmin Professional utility and the TCP/IP protocol to configure your network printer (for Windows®
only) on page 11 for Windows
® and Using the BRAdmin Light utility to change the print server settings (for
Mac OS® X 10.2.4 or greater) on page 105 for Macintosh ® .
Printing the Network Configuration List
Note
Node Name: Node Name appears in the Network Configuration List. The default Node Name is
“BRN_XXXXXX” for a wired network or "BRW_xxxxxx" for a wireless network ("xxxxxx" is the last six digits
of Ethernet address.).
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
1
Press Menu, 5, 6.
2
Press Start.