Brother MFC-8870DW - Manual (Page 88)

Control Panel Setup
74
6
Setup WLAN (Wireless network only)
Setup Wizard
The Setup Wizard guides you through the wireless network configuration. For more information, see Using
the Setup Wizard from the control panel on page 20.
SecurEasySetup
The SecureEasySetup TM software allows you to configure the wireless network easier than configuring it
manually. By pushing a button on the wireless router or access point, you can complete setup and secure the
wireless network. Your router or access point must also support SecureEasySetup
TM . See Using the
SecureEasySetupTM software to configure your machine for a wireless network on page 25.
Set to default
The Set to default allows you to reset each wired or wireless settings to the default. If you want to reset both
wired and wireless settings, see Restoring the network settings to factory default on page 87.
1
(For Wired) Press Menu, 6, 1, 3.
(For Wireless) Press Menu, 6, 2, 4.
2
Press ▲ or ▼ to select Reset or Exit .
3
Press OK.
WLAN Status (Wireless network only)
Status
This field displays the current wireless network status; Active (11b) , Active (11g) , Wired LAN
Active , WLAN OFF or Connection NG .
1
Press Menu, 6, 2, 3, 1.
2
The current wireless network status will be displayed; Active (11b) , Active (11g) , Wired LAN
Active , WLAN OFF or Connection NG .
3
Press Stop/Exit.