Important – Brother MFC-J270W User Manual

Page 76

Advertising
background image

62

f

Using both hands, grasp the plastic tabs
on both sides of the machine and lift the
scanner cover (1) until it locks securely
in the open position.

Move the print head (if necessary) to
take out any paper remaining in this
area. Make sure that jammed paper is
not left in the corners of the machine.
Check both ends of the print cartridge.

Note

If the print head is at the right corner as
shown in the illustration, you cannot move
it. Re-connect the power cord, then hold
down Stop/Exit until the print head moves
to the middle. Unplug the machine from
the power source, and take out the paper.

IMPORTANT

If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.

g

Lift the scanner cover to release the
lock ( ). Gently push the scanner cover
support down ( ) and close the
scanner cover ( ) using both hands.

h

Push the paper tray firmly back into the
machine.

i

While holding the paper tray in place,
pull out the paper support ( ) until it
clicks, and then unfold the paper
support flap ( ).

Make sure you pull out the paper
support until it clicks.

IMPORTANT

DO NOT use the paper support flap for
Legal size paper.

j

Re-connect the power cord.

1

2

1

3

2

1

2

Advertising
This manual is related to the following products: