Brother HL-4570CDW - Manual (Page 5)

5
4
Print a test page
a
Connect the AC power cord to the machine and
then connect it to an AC power outlet.
b
Remove the label covering the machine's
power switch, and then switch the machine on.
c
After the machine has finished warming up, the
LCD will show Ready.
d
Press Go. The machine will print a test page.
Check that the test page has printed correctly.
IMPORTANT
DO NOT connect the interface
cable yet.
Note
You can adjust the angle of the display by lifting it.
Note
This function will not be available after the first
print job you send from your computer.