Brother PT-E550W - Manual (Page 10)

8
1
2
3
4
5
6
7
9
9
Tape Cutting Options

EDI
T
ING
A LABEL
The tape cutting options allow you to specify how the tape is fed and cut when printing labels.
Press the Menu key.
Select "Cut Option" using the or key, and then press the OK or Enter key.
Set the value by using the or key, and then press the OK or Enter key to apply the
settings.

Tape Cutting Options

Tape Cutting Options
1
2
3
New settings are NOT applied if you do not press the OK or Enter key.
• Press the Esc key to return to the previous step.
• Refer to the Tape Cutting Options table for a list of all available settings.
No Full cut Half cut Chain Image
1 No Yes No
2 Yes Yes No
3 No No No
4 Yes No No
5 No Yes Yes