Brother PT-E550W - Manual (Page 41)

USING P-TOUCH SOFTWARE
40
Using the Data Transferred to the P-touch Labeling System
 Editing the database
Press the Database key, select the database to be edited and
then press the OK or Enter key.
You can also select the database to be edited by pressing the File
key, and selecting "Transferred Templates" - "Print from
Database" using the or key.
The first record of the selected database is displayed.
Select the cell to be edited using the or key. Then press the
OK or Enter key.
Enter the new text.
Press the OK key.
The new text is displayed.
Press the OK key again.
The edited record will be highlighted.
1
2
3
Press the Esc key to cancel editing the text and return to the previous screen
• You can add or delete a line break.
• Each cell can contain a maximum of 7 lines.
If you do not want to print the database, press the OK key and then
press the Esc key. The edited data will be saved.
4
5