Brother FAX-2440C - Manual (Page 90)

REMOTE FAX OPTIONS 6 - 2
Programming your pager number
When Paging is selected, your machine dials the pager number
you’ve programmed, and then dials your Personal Identification
Number (PIN). This activates your pager so you will know that you
have a voice or fax message in the memory.
1
Press Menu/Set , 2 , 5 , 1 .
2
Press ▲ or ▼ to select Paging .
3
Enter your pager phone number
followed by # # (up to 20 digits).
Press
Menu/Set .
Do not include the area code if it is the same as that of your
machine.
For example, press
1 8 0 0 5 5 5 1 2 3 4 # # .
4
If your pager needs a PIN, enter the PIN, press # , press
Redial/Pause , enter your fax number followed by # # .
Press Menu/Set .
(For example, press 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 5 5
1 2 1 2 # # )
— OR —
If you do not need a PIN, press Redial/Pause , enter your fax
number followed by # # .
Press Menu/Set .
(For example, press Redial/Pause 1 8 0 0 5 5 5 3 4 3 4 # # )
5
Press Stop/Exit .
■
You cannot change a Paging number or PIN remotely. If you
have set Paging, a backup copy of the received fax will
automatically be printed at the machine.
■
If you want to be paged for voice messages make sure you
pressed the MC On/Off key to turn the Message Center on.
Remote Fax Opt
1.Fwd/Page/Store