Brother DCP-8110DN - Manual (Page 19)

9
2
2
Loading paper and
print media
2
The machine can feed paper from the
standard paper tray, optional lower tray
1
or
multi-purpose tray.
When you put paper into the paper tray, note
the following:
 If your application software supports
paper size selection in the print menu, you
can select it through the software. If your
application software does not support it,
you can set the paper size in the printer
driver or by using the control panel
buttons.
1 The optional lower tray is available for DCP-8150DN
and DCP-8155DN.
Loading paper in the standard
paper tray and the optional
lower tray
2
You can load up to 250 sheets in the standard
paper tray (Tray 1) and 500 sheets in the
optional lower tray (Tray 2). Paper can be
loaded up to the maximum paper mark
(
) on the right-hand side of the paper
tray. (For recommended paper to use, see
Acceptable paper and other print media
uu
page 18.)
Printing on plain paper, thin paper or
recycled paper from Tray 1 and Tray 2
2
a
Pull the paper tray completely out of the
machine.
b
While pressing the green paper-guide
release lever (1), slide the paper guides
to fit the paper you are loading in the
tray. Make sure that the guides are
firmly in the slots.
Loading paper
2
1
1