Brother DCP-8110DN - Manual (Page 27)

Loading paper
17
2
Tray Use in COPY mode
2
You can change the priority tray that the
machine will use for printing copies.
When you choose Tray#1 Only, MP Only
or Tray#2 Only
1
, the machine pulls the
paper only from that tray. If the selected tray
is out of paper, No Paper will appear on the
LCD. Insert the paper in the empty tray.
To change the tray setting follow the
instructions below:
a
Press Menu, 1, 5, 1.
15.Tray Use
1.Copy
a MP>T1>T2
b T1>T2>MP
Select ab or OK
b
Press a or b to choose Tray#1 Only,
Tray#2 Only
1
, MP Only,
MP>T1>T2
1
or T1>T2
1
>MP
.
Press OK.
1
Tray#2 Only
and T2 appear only if the
optional lower tray is installed on the
DCP-8150DN or DCP-8155DN.
c
Press Stop/Exit.
Note
• When loading the documents in the ADF
and MP>T1>T2 or T1>T2>MP is selected,
the machine looks for the tray with the
most suitable paper and pulls paper from
that tray. If no tray has suitable paper, the
machine pulls paper from the higher
priority tray.
• When using the scanner glass, your
document is copied from the higher
priority tray even if more suitable paper is
in another paper tray.
Tray Use in print mode
2
You can change the default tray the machine
will use for printing from your computer and
Direct Print.
a
Press Menu, 1, 5, 2.
15.Tray Use
2.Print
a MP>T1>T2
b T1>T2>MP
Select ab or OK
b
Press a or b to choose Tray#1 Only,
Tray#2 Only
1
, MP Only,
MP>T1>T2
1
or T1>T2
1
>MP
.
Press OK.
1
Tray#2 Only
and T2 appear only if the
optional lower tray is installed on the
DCP-8150DN or DCP-8155DN.
c
Press Stop/Exit.