Brother HL-2280DW - Manual (Page 19)

19
For Wireless Network Users
Wireless Network
Windows
®
M
acin
tosh
Configuration using the Installation CD-ROM and temporarily using a USB cable
(Windows
® only)
10
Configure the wireless
settings
a
Put the installation CD-ROM into your CD-ROM
drive. If prompted, select your model and language.
b
Click Initial Installation and then Install
MFL-Pro Suite.
c
Click Yes if you accept the license agreement.
Follow the on-screen instructions.
d
Choose Wireless Network Connection and
then click Next.
e
When this screen appears, choose Change
the Firewall port settings to enable network
connection and continue with the
installation. (Recommended) and click Next.
(Not for Windows
® 2000 users)
If you are not using the Windows ® Firewall, see
the user's guide of your firewall or antivirus
software for information on how to add the
following network ports.
 For network scanning, add UDP port 54925.
 If you still have trouble with your network
connection, add UDP port 137.
f
Choose No and then click Next.
g
Read the Important Notice. Check the box
after you confirm the SSID and Network Key,
and then click Next.
IMPORTANT
• You need to temporarily use a USB cable or
Ethernet cable during configuration (cable
not included).
• For Windows ® 2000 and Windows ® XP users
you must have the wireless settings you
wrote down for your network in step
9 on
page 17 before you proceed.
Note
If the Brother screen does not appear automatically,
go to My Computer (Computer), double-click the
CD-ROM icon, and then double-click start.exe.
Note
For Windows Vista ® and Windows ® 7, when the
User Account Control screen appears, click
Allow or Yes.
Note
If you are installing from a wireless PC running
Windows Vista
® or Windows ® 7, check the box
and then click next. The installer will automatically
detect your wireless network settings.