Brother HL-2280DW - Manual (Page 23)

23
For Wireless Network Users
Wireless Network
Windows
®
M
acin
tosh
One push configuration using Wi-Fi Protected Setup or AOSS™
(Windows
® and Macintosh)
10
Configure the wireless
settings
a
Confirm your wireless access point/router has
the Wi-Fi Protected Setup or AOSS™ symbol
as shown below.
b
Place the Brother machine within range of your
Wi-Fi Protected Setup or AOSS™ access
point/router. The range may differ depending
on your environment. Refer to the instructions
provided with your access point/router.
c
On your machine, press Menu and press a or
b
to choose 4.Network, and press OK. Press
a or b to choose 2.WLAN, and press OK. Press
a or b to choose 3.WPS/AOSS, and press OK.
When WLAN Enable ? is displayed, press a
to choose On. This will start the wireless setup
wizard.
Otherwise press Stop/Exit to exit from the
wireless setup wizard.
When Start WPS/AOSS on your
wireless access point/router.
appears, press the Wi-Fi Protected Setup or
AOSS™ button on your wireless access
point/router. See the user’s guide for your
wireless access point/router for instructions.
And then press OK.
This feature will automatically detect which
mode (Wi-Fi Protected Setup or AOSS™) your
access point/router uses to configure your
machine.
d
A connection result message appears on the
LCD and a WLAN report will automatically be
printed.
If the connection failed, check the error code on
the printed report and refer to
Troubleshooting on page 24.
To install the MFL-Pro Suite, continue to
step 11.
For Windows ® Users:
Now go to
page 28
For Macintosh Users:
Now go to
page 30
Note
If your wireless access point/router supports
Wi-Fi Protected Setup (PIN Method) and you
want to configure your machine using the PIN
(Personal Identification Number) Method, see
Using the PIN Method of Wi-Fi Protected Setup in
the Network User's Guide.
Wireless setup is now complete.