Brother CS 80 - Manual (Page 111)

Troubleshooting 105
4
The fabric does
not feed.
The feed dogs are lowered. Slide the drop feed lever to the left. page 83
The stitch is too fine. Lengthen the stitch length. page 52
The presser foot that is used is not
appropriate for the type of stitch that
you wish to sew.
Attach the presser foot that is appro-
priate for the type of stitch that you
wish to sew.
page 96
The thread is tangled, for example,
in the shuttle.
Remove the tangle thread. If the
thread is tangled in the shuttle, clean
the shuttle.
page 100
The sewing lamp
does not come on. The sewing lamp is damaged.
Contact your retailer or the nearest
authorized service center.
–
Symptom Probable Cause Remedy Reference
S2_brotherE.book Page 105 Thursday, February 13, 2003 11:03 AM