Brother DCP-J125 - Manual (Page 11)

Making copies
7
3
Place your document face down in the
direction shown below.
 2 in 1 (P)
 2 in 1 (L)
 4 in 1 (P)
 4 in 1 (L)
 Poster(3 x 3)
You can make a poster size copy of a
photograph.
Adjusting Density
3
You can adjust the copy density to make
copies darker or lighter.
a
Load your document.
b
Enter the number of copies you want.
c
Press a or b to choose Density.
Press OK.
d
Press c to make the copy darker or
press d to make the copy lighter.
Press OK.
e
If you do not want to change additional
settings, press Black Start or
Color Start.
Setting your changes as the
new default
3
You can save the copy settings for Quality,
Enlarge/Reduce, Density and
Page Layout that you use most often by
setting them as the default settings. These
settings will stay until you change them again.
a
Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
a
or b to choose Set New Default.
Press OK.
c
Press + to choose Yes.
d
Press Stop/Exit.