Brother DCP-J125 - Manual (Page 5)

1
1
1
Memory storage
1
Your menu settings are stored permanently,
and in the event of a power failure will not be
lost. Also, you will not lose your settings in the
PHOTO CAPTURE mode key menu if you
have chosen Set New Default.
Temporary settings (for example, Contrast)
will be lost.
Sleep Mode
1
You can choose how long the machine must
be idle (from 1 to 60 minutes) before it goes
into sleep mode. The timer will restart if any
operation is carried out on the machine.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Sleep Mode.
Press OK.
d
Press a or b to choose 1Min, 2Mins,
3Mins, 5Mins, 10Mins, 30Mins or
60Mins which is the length of time the
machine is idle before entering sleep
mode.
Press OK.
e
Press Stop/Exit.
LCD screen
1
Changing LCD language
1
You can change the LCD language.
a
Press Menu.
b
Press a or b to choose
Initial Setup.
Press OK.
c
Press a or b to choose
Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
LCD Contrast
1
You can adjust the LCD contrast for a sharper
and more vivid display. If you are having
difficulty reading the LCD, try changing the
contrast setting.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose LCD Contrast.
Press OK.
e
Press d to decrease the contrast or
press c to increase the contrast.
Press OK.
f
Press Stop/Exit.
General setup
1