Brother HL-S7000DN - Manual (Page 11)

IPsec Settings
8
2
 Template Name
Enter a name for the template in this box. (Maximum of 16 characters)
 Service Name
The default service names and previously created service names are displayed. Select the services
that you want to add to the template.
 Setup Service
Click Setup Service to configure the template by adding services. (See Setup Service uu page 8.)
 Selected Service
The service information (Service Name, Direction, Protocol, and Port) selected for Service Name
is displayed.
Note
• A maximum of 32 services can be added at one time.
• For details about the protocols that you can specify in IPsec Service Template, see Appendix A.
 Submit
Click this button to register the settings.
Note
When you change the settings of the currently used template, the IPsec setting screen for Web Based
Management will close and open again.
Setup Service
2
Create a new service.
a In the IPsec Service Template screen, click Setup Service.
60 Service Name will be displayed. If the Service Name has not been configured, Not Configured will
be displayed.
 Delete
Click this button to delete the selected Service Name. However, the currently used Service Name
cannot be deleted.
 IPsec Service Template
Click this button to return to the IPsec Service Template screen.