Brother HL-S7000DN - Manual (Page 6)

Introduction
3
1
• Main: The main mode is used.
• Aggressive: The aggressive mode is used.
Note
IKE is a protocol that is used to exchange encryption keys in order to carry out encrypted communication
using IPsec.
If the Main mode is selected, the processing speed is slow, but the security is high. If the Aggressive
mode is selected, the processing speed is faster than when the Main mode is selected, but the security is
lower.
 All Non-IPsec Traffic
Select the action to be taken for non-IPsec packets.
• Allow: All packets are allowed to be received.
• Drop: Non-IPsec packets are discarded.
Note
When using Web Services, you must select Allow for All Non-IPsec Traffic. If Drop is selected, Web
Services cannot be used.
 Rules
A maximum of 10 IPsec connection conditions (template set) can be configured.
 Enabled
When this check box is selected, the template set for that number is enabled.
Note
When multiple check boxes are selected, the check boxes with the lower numbers are given priority if the
settings for the selected check boxes conflict.
 Template - Address
Select the Address Template that is used for the IPsec connection conditions.
To add an Address Template, click Add Template. (See Address Template uu page 5.)
 Template - Service
Select the Service Template that is used for the IPsec connection conditions.
To add a Service Template, click Add Template. (See Service Template uu page 7.)
Note
If you want to use DNS for the name resolution when using service templates 2, 3, and 4 in Appendix A,
the DNS settings must be configured separately.
 Template - IPsec
Select the IPsec Template that is used for the IPsec connection conditions.
To add an IPsec Template, click Add Template. (See IPsec Template uu page 12.)