Brother PocketJet PJ-673 w WLAN - Manual (Page 7)

6
AC adapter/DC cable
Only use the AC adapter/DC cable designed specifically for this printer, otherwise fire, electric
shock, or damage may result.
The AC adapter/DC cable is designed specifically for use with this printer. Do not use with any other
product.
Do not place the product near chemicals or in a place where chemical spillage could occur. In
particular organic solvents or liquids may cause the casing and/or cables to melt or dissolve, risking
fire or electric shock. They may also cause the product to malfunction or become discolored.
The printer and AC adapter/DC cable are made for use with the authorized power source
(AC100-240V 50/60Hz) only. Do not use an unauthorized power source, as doing so may result in
fire, electric shock, injury, or property damage. If you have questions about your power source,
consult a qualified electrician.
Do not touch the AC adapter/DC cable or the power supply plug with wet hands, otherwise electric
shock may result.
Do not try to disassemble, alter, or repair the AC adapter/DC cable, otherwise fire, electric shock,
or injury may result.
For servicing, adjustments or repairs, contact the sales representative where the printer was
purchased.
Do not spill water or drinks on the AC adapter/DC cable. In addition, do not use the AC adapter/DC
cable in a location where it may get wet, otherwise explosion or electric shock may result.
If the power supply plug becomes dirty (for example, if it becomes covered with dust) disconnect it
from the electrical outlet, and wipe it with a dry cloth. Continuing to use a dirty power supply plug
may result in fire.
When disconnecting the AC power cord, do not pull on the cord, or fire or electric shock may result.
Pull only on the plug itself.
Do not insert foreign objects into the AC adapter/DC cable, otherwise burns or electric shock may
result.
WARNING