Brother PocketJet PJ-673 w WLAN - Manual (Page 8)

7
En
g
lis
h
Use the AC adapter/DC cable correctly and observe the following precautions, otherwise fire or
electric shock may result.
 Do not damage the AC adapter/DC cable.
 Do not modify the AC adapter/DC cable.
 Do not twist, pull or severely bend the AC adapter/DC cable.
 Do not expose the AC adapter/DC cable to heat.
 Do not bind the AC adapter/DC cable.
 Do not place objects on the AC adapter/DC cable or allow it to be pinched.
If the AC adapter/DC cable is damaged, request a new one from the sales representative where the
printer was purchased.
Keep the AC adapter/DC cable out of the reach of children, particularly infants, otherwise injury may
result.
Do not use the AC adapter/DC cable near flames or heaters. If the covering of the AC adapter/DC
cable cord melts, fire or electric shock may result.
Do not overload electric outlets or plug multiple devices into the same electric outlet. There is a risk
of fire, electric shock, and damage.
Before cleaning the printer, disconnect the AC adapter/DC cable from the electrical outlet,
otherwise electric shock may result.
When connecting the AC adapter/DC cable, always push the plug into the electric outlet as far as it
will go in order to ensure a solid connection, otherwise fire, electric shock, or damage may result.
If the printer will not be used for a long period of time, disconnect the AC adapter/DC cable from the
printer and the electrical outlet.
Brother strongly recommends that you DO NOT use any extension cord.
WARNING