Brother MFC-9420CN - Manual (Page 50)

Internet printing for Windows®
5 - 7
5
Windows ® 2000/XP IPP printing
Use the following instructions if you wish to use the IPP printing capabilities of Windows ® 2000/XP.
Note
• You must configure the IP address on your machine before you proceed with this section. If you have
not configured the IP address, see Configuring your network printer on page 2-1 first.
• Verify the host computer and print server are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
• The default password for Brother print servers is "access".
1
For Windows ® 2000: Go to the Start button, select Settings and then Printers.
For Windows ® XP: Go to the Start button and select Printers and Faxes.
2
For Windows ® 2000: Double click the Add Printer icon to get the Add Printer Wizard.
For Windows ® XP: Double-click Add a printer to get the Add Printer Wizard.
3
Click Next when you see the Welcome to the Add Printer Wizard screen.
4
Select Local printer or Network printer. For Windows ® 2000: Make sure that you select Network
Printer.
For Windows
® XP: Make sure that you select A network printer, or a printer attached to another
computer.
5
Click Next.
6
For Windows ® 2000: Select Connect to a printer on the Internet or on your intranet and then enter
the following in the URL field: http://printer_ipaddress:631/ipp (Where
printer_ipaddress is the IP address or the print server name).
For Windows ® XP: Select Connect to a printer on the Internet or on a home or office network and
then enter the following in the URL field: http://printer_ipaddress:631/ipp (Where
printer_ipaddress is the IP address or the print server name).